Coo-Var Anti-Condensation Paint – The Paint That Truly Stops Condensation

Introduction

One in five adults regular find ‘excessive’ condensation in their homes. (Source the English Housing Survey). The most commonly-affected surfaces for mould, damp, and condensation were found to be windows, walls, and ceilings.

Condensation is caused by moisture in the air that cools and forms water droplets on cooler surfaces. This is especially common in colder months when there is a significant temperature difference between indoor and outdoor environments.

Areas in your home prone to condensation include exterior walls, attics, basements, bathrooms, kitchens, and cupboards. This is because these spaces often experience high humidity levels due to activities like cooking, showering, and drying clothes, combined with poor ventilation or temperature fluctuations. The cooler surfaces in these areas, such as walls and windows, are more likely to cause moisture in the air to condense, creating damp conditions that can lead to mould, mildew, and structural damage over time.

Damp or Condensation? Key points to distinguish between the two

Location: Condensation typically forms on cold surfaces. Look for water droplets on external walls, windows, and ceilings. Damp patches may also appear in areas prone to water leaks or rising damp from the ground.

Temperature: Condensation is more common where warm, moist air meets cooler surfaces.

Time of Day: Condensation is most likely to happen during early mornings or cold nights.

Air Circulation: Poor ventilation can make condensation worse.

How does Coo-Var Anti-Condensation Paint Provide A Solution

Coo-Var Anti-Condensation Paint works by providing a thermal barrier that maintains a more consistent surface temperature, reducing the likelihood of condensation forming when warm, moist air meets a cold surface. It incorporates thermally resistive microspheres for insulation and additives that prevent the growth of mould and mildew, helping to keep surfaces cleaner and reduce condensation-related problems.

Guidance on application: Anti-Condensation Paint

or optimal results, follow these steps when applying Coo-Var Anti-Condensation Paint:

Step 1: Surface Preparation

Clean any mould and mildew using a mould and mildew remover.

Remove all loose and flaking paint, fill any imperfections and allow to dry.

Feather sound edges with a fine grade abrasive paper.

Remove all dust and dirt using a cloth.

Step 2: Primer/Topcoat

Anti-Condensation paint works by insulating the surface.

Make sure to give the product a good stir.

Apply 2 full coats of the paint but allow 4 hours between coats.

Apply by brush or roller.

Step 3: Decoration

After 4 hours, you can apply your preferred decorative emulsion.

Can be applied to: Plaster, Wood, Metal and GRP.

For more information view Anti-Condensation Paint, and FAQ's