PRODUCT TRAINING
Click here to book product training or call +44(0)1482 328053.
More infoAnti-Slip Step and Ramp Paint
Product Highlights
Low Odour
Fast Drying
Self-Priming
Suitable for Internal & External Use
Water Based
Low Risk In Wet & Dry Conditions (Tested to BS7976-2)
Suitable Surfaces: Wood, concrete, tarmac, stone, brickwork & suitably prepared metal
Finish: Matt
Application: Roller or brush
Drying time: Touch Dry 1 hours or 2 hours hard dry
Overcoat time: 6 hours
Estimated Coverage: 5-9 sq m² per litre
Product Description
Coo-Var Anti-Slip Step and Ramp Paint is a smooth matt finish anti- slip paint that is durable and hard wearing.
Suitable for steps & ramps of different substrates.
​As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053 or email info@coo-var.co.uk.
RAL, BS4800, BS381C & NCS Colours to Order (Minimum of 5L Required).
Anti-Slip Step and Ramp FAQ's
Can Anti-Slip Step and Ramp Floor Paint be applied to any surface?
Acrylic Floor Paint can be applied to various surfaces, including concrete, wood, tarmac, asphalt, and metal. However, the surface must be properly prepared, clean, and free of contaminants such as oil, grease, and dust to ensure the best adhesion and finish.
Can I apply Anti-Slip Step and Ramp Floor Paint over a previous floor paint?
If the previous floor paint is sound and well adhered to original substrate, yes, however we always recommend a test area first.
Do I need a primer?
We recommend priming the surface by thinning down the first coat 5% with water.
For wooden floors seal any knots prior to thinning down the first coat.
How should I prepare the surface before applying the paint?
For concrete floors, shot blasting or acid etching may be necessary to remove dust and laitance.
Ensure the surface is completely clean and dry before application, coo-var degreaser or oil remover can be used to clean the floor.
Moisture content of the surface should be less than 14% prior to painting.
For other surfaces, appropriate cleaning and sanding may be required to create a suitable profile for the paint to adhere to.
For previously painted surfaces, make sure to clean, abrade and remove all loose and falking material.
How long does Anti-Slip Step and Ramp Paint take to dry?
Ovecoat time is 6 hours, you can walk over the surface after 12 hours.
How many coats of Anti-Slip Step and Ramp Floor Paint should I apply?
For the best durability and finish, it’s recommended to apply two coats.
What maintenance is required for Anti-Slip Step and Ramp Floor Paint?
Regular sweeping and mopping with a non-abrasive cleaner will keep the floor looking good. Avoid using harsh chemicals or abrasive cleaning tools, as these can damage the epoxy coating. Additionally, promptly clean up any spills to prevent staining.
Recommended System
​Recommended Systems: (click product titles to go to product)
Concrete Preperation: Oil Remover, Degreaser , Acid Etch
Concrete Primer: Self Priming
Metal Preperation: Degreaser
Metal Prime: Coo-Var All Metals Primer
Wood Preperation: Degreaser
Wood Primer: Self Priming
Technical Information
Delivery
Standard delivery 48 to 72 hours (business hours). Prices are excluding VAT.
| Zone | Free Delivery on Orders Over | Standard Delivery Charge |
| Zone 1 - UK Mainland | £150 | £7.00 |
| Zone 2 - Highlands & Islands/Isle of Man/Isles of Scilly/Isle of Wight | £350 | £30.00 |
| Channel Isles & Ireland - Contact 01482 328053 |
*Please note that these prices only apply for UK Mainland and the Islands above.
If in doubt please call 01482 328052 or email info@coo-var.co.uk​
