PRODUCT TRAINING
Click here to book product training or call +44(0)1482 328053.
More infoDampshield Primer Two-Pack Resin Based Epoxy Primer
Product Highlights
Ideal for: New concrete floors, damp foors, oily floors, garages, workshops, basements, factories and warehouses
Interior or exterior use
Allows the commencement of painting earlier than otherwise would be available
Creates a Breathable Damp Proof Course
Suitable Surfaces: Concrete Floors, Screeds, Vinyl tiles and other difficult surfaces
Overcoat with ProFloor Plus or PolyGuard PU Floor Paint
Finish: Gloss
Application: Roller
Drying time: 2 hours
Overcoat time: 12 hours min / 48 hours max
Estimated Coverage: 20m²
Product Description
Coo-Var Dampshield creates a damp-proof membrane and can be used on new concrete before it has fully cured. Adheres to damp and/or floors with residual oil contamination. Ideal for cellars, basements, garages, factories and warehouses.
Works particularly well as a system underneath Coo-Var Profloor Plus.
As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053or email info@coo-var.co.uk.
Dampshield FAQ's
What is Dampshield two-pack epoxy primer used for?
This two-pack epoxy primer forms a damp-proof membrane (DPM) on floors that lack one. Additionally, it can be applied to new concrete screeds without needing to wait for them to dry before painting.
Can Dampshield two-pack epoxy primer be applied to any surface?
Dampshield can be applied to concrete and screeds.
Can I apply Dampshield two-pack epoxy primer over a previous floor paint?
This product is designed to be applies to a bare substate that still contains a lot of moisture.
How should I prepare the surface before applying Dampshield two-pack epoxy primer?
We recommend acid etching any bare concrete to remove dust and laitance.
Coo-Var degreaser or oil remover can be used to clean the floor.
How long does Dampshield two-pack epoxy primertake to dry?
Minimum ovecoat time is 12 hours and maximum overcoat time is 48 hours. This must be over coated with Profloor Plus
How many coats of Dampshield two-pack epoxy primer should I apply?
See technical data sheet for product to asses how many coats are required for your application, this is normally one coat.
Recommended System
Recommended Systems: (click product titles to go to product)
Concrete Preperation: Oil Remover, Degreaser , Acid Etch
Concrete Topcoat : Profloor Plus and Profloor Plus FH
Wood Preperation: Degreaser
Wood Topcoat: Profloor Plus and Profloor Plus FH
Technical Information
Delivery
Standard delivery 48 to 72 hours (business hours). Prices are excluding VAT.
| Zone | Free Delivery on Orders Over | Standard Delivery Charge |
| Zone 1 - UK Mainland | £150 | £7.00 |
| Zone 2 - Highlands & Islands/Isle of Man/Isles of Scilly/Isle of Wight | £350 | £30.00 |
| Channel Isles & Ireland - Contact 01482 328053 |
*Please note that these prices only apply for UK Mainland and the Islands above.
If in doubt please call 01482 328052 or email info@coo-var.co.uk
