PRODUCT TRAINING
Click here to book product training or call +44(0)1482 328053.
More infoFloor Primer Sealer
Product Highlights
Low Cost
Prevents Dusting
Interior and Exterior use
Suitable Surfaces: Wood, Suitably Prepared Metal and Concrete
Finish: Semi-Gloss
Application: Roller or brush
Drying time: Touch Dry 4 hours or 12 hours hard dry
Overcoat time: 16 hours or overnight
Estimated Coverage: 10-12m² per litre
Product Description
Coo-Var Floor Primer Sealer prevents dusting and is ideal where a low cost sealer is required. It can be used for interior and exterior use.
As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053 or email info@coo-var.co.uk.
Floor Sealer FAQ's
Can Floor Sealerbe applied to any surface?
Floor Sealer can be applied to various surfaces, including concrete, wood, and metal. However, the surface must be properly prepared, clean, and free of contaminants like oil, grease, and dust for the best adhesion and finish.
Can I apply Floor Sealerover a previous floor paint?
We recommend applying this floor paint over previous single pack floor paints only, applying over a two-pack floor paint is not recommended
Do I need a primer?
We recommend priming bare concrete and wood with the first coat of Coo-Var Floor Sealer Thinned 10% with Thinners 14.
For Metal, Prime with the Zinc Phosphate Primer
How should I prepare the surface before applying the paint?
For concrete floors, shot blasting or acid etching may be necessary to remove dust and laitance.
Ensure the surface is completely clean and dry before application, coo-var degreaser or oil remover can be used to clean the floor.
Moisture content of the surface should be less than 14% prior to painting.
For other surfaces, appropriate cleaning and sanding may be required to create a suitable profile for the paint to adhere to.
For previously painted surfaces, make sure to clean, abrade and remove all loose and falking material.
How long does Floor Sealertake to dry?
Ovecoat time is 16 hours, you can walk over the surface after 12 but we recommend leaving the floor 5 - 7 days before exposing it to heavy foot traffic.
How many coats of Floor Sealershould I apply?
For the best durability and finish, it’s recommended to apply two full top coats.
What maintenance is required for Floor Sealer?
Regular sweeping and mopping with a non-abrasive cleaner will keep the floor looking good. Avoid using harsh chemicals or abrasive cleaning tools, as these can damage the coating. Additionally, promptly clean up any spills to prevent staining.
Recommended System
Recommended Systems: (click product titles to go to product)
Concrete Preperation: Oil Remover, Degreaser , Acid Etch
Concrete Prime: Thinned down 10% coat of Floor Primer Sealer
Wood Preperation: Degreaser
Wood Prime: Coo-Var Aluminium Wood Primer
Technical Information
Delivery
Standard delivery 48 to 72 hours (business hours). Prices are excluding VAT.
| Zone | Free Delivery on Orders Over | Standard Delivery Charge |
| Zone 1 - UK Mainland | £150 | £7.00 |
| Zone 2 - Highlands & Islands/Isle of Man/Isles of Scilly/Isle of Wight | £350 | £30.00 |
| Channel Isles & Ireland - Contact 01482 328053 |
*Please note that these prices only apply for UK Mainland and the Islands above.
If in doubt please call 01482 328052 or email info@coo-var.co.uk
