Guard-Coat Two-Pack Epoxy

Product Description

Coo-Var Guard-Coat is a two pack water-based paint for floors and walls, containing antibacterial properties through Silver ion technology to protect against MRSA and E.Coli.

Ideal for use in hospitals, clinics, schools & commercial kitchens it also reduces scuffs on walls from chairs and beds.

RAL, BS4800, BS381C & NCS Colours to Order (Minimum of 5L Required).

As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053 or email info@coo-var.co.uk.

Guard Coat FAQ's

Can Guard Coat two-pack epoxy floor and wall paint be applied to any surface?

Guard Coat can be applied to walls, ceilings and floors, concret, plaster, and over previous emulsion paints.

Can I apply Guard Coat two-pack epoxy floor and wall paint over a previous floor paint?

On walls this product can be applied over a previous paint coating however on floors we only recommend applying Guard Coat over a previous two-pack epoxy floor paint or primer.

Do I need a primer when usingGuard Coat two-pack epoxy floor and wall paint?

We recommend priming bare concrete with ProSeal High Performance Primer

How should I prepare the surface before applying Guard Coat two-pack epoxy floor and wall paint?

For concrete floors acid etching may be necessary to remove dust and laitance.

Ensure the surface is completely clean and dry before application, coo-var degreaser or oil remover can be used to clean the floor.

Moisture content of the surface should be less than 14% prior to painting.

For other surfaces, appropriate cleaning and sanding may be required to create a suitable profile for the paint to adhere to.

For previously painted surfaces, make sure to clean, abrade and remove all loose and falking material.

How long does Guard Coat two-pack epoxy floor and wall paint take to dry?
Ovecoat time is 16 hours, you can walk over the surface after 24 but we recommend leaving the floor 5 - 7 days before eposing it to heavy traffic.

How many coats of Guard Coat two-pack epoxy floor and wall paint should I apply?
For the best durability and finish, it’s recommended to apply two coats.

What maintenance is required for Guard Coat two-pack epoxy floor and wall paint?
Regular sweeping and mopping with a non-abrasive cleaner will keep the floor looking good and anti-bacterial technology in effect. Avoid using harsh chemicals or abrasive cleaning tools, as these can damage the epoxy coating. Additionally, promptly clean up any spills to prevent staining.

Recommended System

Recommended Systems: (click product titles to go to product)

Concrete Preperation: Oil Remover, Degreaser , Acid Etch

Concrete Primer: Proseal High Performance Primer

Wood Preperation: Degreaser

Wood Primer: Proseal High Performance Primer ​

Technical Information

• 138-W224 GUARD-COAT BASE-COLOURANTS ALL TINTS & GREY-SDS11272-UK

• 138-W224 - GUARD-COAT BASE FOR TILE RED, BLACK, WHITE, GREEN, SAFETY RED, YELLOW - SDS11274 - UK

• 138-W224 - GUARD-COAT HARDENER FOR GREEN - SDS11276 - UK.pdf

• 138-W224 - GUARD-COAT HARDENERS - ALL EXCEPT GREEN - SDS11275

• GUARD-COAT TDS CV.pdf

• 138-W224 - GUARD-COAT BASE CLEAR - SDS11273 - UK.pdf

Delivery

Standard delivery 48 to 72 hours (business hours). Prices are excluding VAT.

*Please note that these prices only apply for UK Mainland and the Islands above.

If in doubt please call 01482 328052 or email info@coo-var.co.uk​