PRODUCT TRAINING
Click here to book product training or call +44(0)1482 328053.
More infoProfloor Plus Two-Pack Epoxy
Product Highlights
Low odour
Exceptionally hard wearing
High Chemical Resistnce
Takes heavy traffic after 36 hours
Anti- Slip Additive available
Finish: Hard Film Gloss
Application: Shortpile Roller or brush
Drying time: Touch Dry 4-8 hours. Hard dry 24-36 hours. Full cure 5-7 days. Accepts light traffic in 12-16 hours
Overcoat time: Minimum 6 hours, Maximum 48 hours
Estimated Coverage: 4-5m² per kg
Product Description
Coo-Var Profloor Plus is resin based two-pack epoxy floor paint for the harshest environments. With exeptional durability and high chemical resistance Profloor Plus is suitable for workshops and warehouses with heavy veichle traffic and chemical durability needed.
RAL, BS4800, BS381C & NCS Colours to Order (Minimum of 5 x 5KG Required).
As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053 or email info@coo-var.co.uk.
Please note: This product is sold as a 5KG mixed unit and is dispatched in 2 separate cans a 5L & 1L.
Profloor Plus FAQ's
What is the difference between Profloor Plus and normal Profloor?
Profloor Plus is a resin-based, two-part epoxy that offers superior durability and enhanced chemical resistance, making it ideal for environments exposed to a high volume of chemicals. In contrast, the standard Profloor is a water-based, two-part epoxy that is slightly less durable and has lower chemical resistance, suitable for garages and warehouses where chemical exposure is minimal.
Can Profloor Plus be applied to any surface?
Profloor Plus can be applied to various surfaces, including concrete, wood, and metal. However, the surface must be properly prepared, clean, and free of contaminants like oil, grease, and dust for the best adhesion and finish.
Can I apply Profloor Plus over a previous floor paint?
We recommend applying this floor paint over previous two-pack epoxy floor paints only, applying over a single pack floor paint is not recommended.
Do I need a primer?
We recommend priming bare concrete with ProSeal High Performance Primer or Dampshield Primer on concrete surfaces of over 14% moisture readings.
For Metal use 2 Pack Zinc Phosphate Primer
How should I prepare the surface before applying the paint?
For concrete floors, shot blasting or acid etching may be necessary to remove dust and laitance.
Ensure the surface is completely clean and dry before application, coo-var degreaser or oil remover can be used to clean the floor.
Moisture content of the surface should be checked to determine correct primer prior to painting.
For other surfaces, appropriate cleaning and sanding may be required to create a suitable profile for the paint to adhere to.
For previously painted surfaces, make sure to clean, abrade and remove all loose and falking material.
How long does Profloor Plus take to dry?
Ovecoat time is 16 hours, you can walk over the surface after 24 but we recommend leaving the floor 5 - 7 days before heavy traffic.
How many coats of Profloor should I apply?
For the best durability and finish, it’s recommended to apply two coats.
What maintenance is required for Profloor?
Regular sweeping and mopping with a non-abrasive cleaner will keep the floor looking good. Avoid using high abrasive cleaning tools, as these can damage the epoxy coating. Additionally, promptly clean up any spills to prevent staining.
Recommended System
Recommended Systems: (click product titles to go to product)
Concrete Preperation: Oil Remover, Degreaser , Acid Etch
Concrete Primer: Proseal High Performance Primer or Dampshield
Wood Preperation: Degreaser
Wood Primer: Proseal High Performance Primer or Dampshield
Technical Information
Delivery
Standard delivery 48 to 72 hours (business hours). Prices are excluding VAT.
| Zone | Free Delivery on Orders Over | Standard Delivery Charge |
| Zone 1 - UK Mainland | £150 | £7.00 |
| Zone 2 - Highlands & Islands/Isle of Man/Isles of Scilly/Isle of Wight | £350 | £30.00 |
| Channel Isles & Ireland - Contact 01482 328053 |
*Please note that these prices only apply for UK Mainland and the Islands above.
If in doubt please call 01482 328052 or email info@coo-var.co.uk
