PRODUCT TRAINING
Click here to book product training or call +44(0)1482 328053.
More infoProseal High-Performance Primer Two-Pack Epoxy Primer
Product Highlights
Low odour.
Particularly recommended with Profloor
Assists adhesion to shiny surfaces
Suitable Surfaces: Wood and Concrete
Finish: Semi Gloss
Application: Shortpile Roller or brush
Drying time: Touch Dry 2-3 hours or 16 hours hard dry. Full cure: 5-7 days
Overcoat time: 16 hours min or 7 days max
Estimated Coverage: 7-10m² per kg
Health and Safety: Contains: REACTION PRODUCT: BISPHENOL A-(EPICHLOROHYDRIN):EPOXY RESIN (NUMBER AVERAGE MWandlt;=700), FORMALDEHYDE, OLIGOMERIC REACTION PRODUCTS WITH 1-CHLORO-2,3-EPOXYPROPANE AND PHENOL OXIRANE, MONO [(C12-14 - ALKOXY) METHYL] DERIVS.
Product Description
ProSeal High-Performance Primer is a water based two pack epoxy primer,giving exceptional adhesion to shiny surfaces such as glazed tiles and power floated floors.
As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053 or email info@coo-var.co.uk.
Please note: The 5KG mixed unit is despatched in 2 separate cans a 5L & 1L. The 1KG mixed unit is despatched in 2 separate cans a 1L & 250ml.
Proseal High-Performance Primer FAQ's
Can Proseal High-Performance Primerbe applied to any surface?
Proseal High-Performance Primer can be applied to concrete and screeds. However, the surface must be properly prepared, clean, and free of contaminants like oil, grease, and dust for the best adhesion and finish.
Can I apply Proseal High-Performance Primerover a previous floor paint?
We do not recommend applying this floor paint over any previous floor paints as it is designed to be applied to bare substate for best adhesion between substrate and top coat.
How should I prepare the surface before applying the paint?
For concrete and screeded floors, acid etching is necessary to remove dust and laitance.
Ensure the surface is completely clean and dry before application, coo-var degreaser or oil remover can be used to clean the floor.
How long does Proseal High-Performance Primer take to dry?
Minimum ovecoat time is 16 hours.
How many coats of Proseal High-Performance Primer should I apply?
1 coat.
Recommended System
Recommended Systems: (click product titles to go to product)
Concrete Preperation: Oil Remover, Degreaser, Acid Etch
Concrete Topcoat : Guard-Coat , Profloor , Progrip, Profloor Plus and Profloor Plus FH
Wood Preperation: Degreaser
Wood Topcoat: Guard-Coat , Profloor , Progrip, Profloor Plus and Profloor Plus FH
Technical Information
Delivery
Standard delivery 48 to 72 hours (business hours). Prices are excluding VAT.
| Zone | Free Delivery on Orders Over | Standard Delivery Charge |
| Zone 1 - UK Mainland | £150 | £7.00 |
| Zone 2 - Highlands & Islands/Isle of Man/Isles of Scilly/Isle of Wight | £350 | £30.00 |
| Channel Isles & Ireland - Contact 01482 328053 |
*Please note that these prices only apply for UK Mainland and the Islands above.
If in doubt please call 01482 328052 or email info@coo-var.co.uk
