Suregrip® Anti-Slip Floor Paint

Product Description

Suregrip® the ultimate anti-slip floor paint.

Pre-aggregated for a proffesional finish, it provides high-slip resistance where saftey is a priority.

Suitable for ramps, walkways, steps, stairwells, car pits and around machinery. It is also suitable for internal and external use.

As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053 or email info@coo-var.co.uk.

RAL, BS4800, BS381C & NCS Colours to Order (Minimum of 10L Required).

Suregrip FAQ's

Can Suregrip Anti-Slip Floor Paint be applied to any surface?

Suregrip can be applied to various surfaces, including concrete, wood, and metal. However, the surface must be properly prepared, clean, and free of contaminants such as oil, grease, and dust to ensure the best adhesion and finish.

Can I apply Suregrip Anti-Slip Floor Paint over a previous floor paint?

If the previous floor paint is sound and well adhered to original substrate, yes, however we always recommend a test area first.

Do I need a primer?

We recommend priming the concrete by thinning down the first coat of Coo-Var Floor Paint, 10% (with white spirit).

For wooden floors seal any knots prior to thinning down the first coat of Coo-Var Floor Paint.

How should I prepare the surface before applying the paint?

For concrete floors acid etching may be necessary to remove dust and laitance.

Ensure the surface is completely clean and dry before application, coo-var degreaser or oil remover can be used to clean the floor.

Moisture content of the surface should be less than 14% prior to painting.

For other surfaces, appropriate cleaning and sanding may be required to create a suitable profile for the paint to adhere to.

For previously painted surfaces, make sure to clean, abrade and remove all loose and falking material.

What type of roller should I use to apply Suregrip Anti-Slip Floor Paint?

We suggest using a short pile roller sleeve.​

How long does Suregrip Anti-Slip Floor Paint take to dry?
Ovecoat time is 16 hours, you can walk over the surface after 24 hours.

How many coats of Suregrip Floor Paint should I apply?
For the best durability and finish, it’s recommended to apply two coats.

What maintenance is required for Suregrip Anti-Slip Floor Paint?
Regular sweeping with a non-abrasive cleaner will keep the floor looking good. Avoid using harsh chemicals or abrasive cleaning tools, as these can damage the epoxy coating. Additionally, promptly clean up any spills to prevent staining.

Recommended System

Recommended Systems: (click product titles to go to product)

Concrete Preperation: Oil Remover, Degreaser, Acid Etch

Concrete Prime: Thinned down 10% coat of Coo-Var Floor Paint

Metal Preperation: Degreaser

Metal Prime: Coo-Var Zinc Phosphate Primer

Wood Preperation: Degreaser

Wood Prime: Coo-Var Aluminium Wood Primer

Technical Information

• SUREGRIP TDS CV.pdf

• Suregrip Flyer

• Floor Paints PTV Table

• 125/G139 - SUREGRIP (ALL COLOURS)

• 125-G139 – SUREGRIP GREY – SDS10104 – UK

Delivery

Standard delivery 48 to 72 hours (business hours). Prices are excluding VAT.

*Please note that these prices only apply for UK Mainland and the Islands above.

If in doubt please call 01482 328052 or email info@coo-var.co.uk​