Hammercote Metal Paint Smooth Finish

Product Description

Coo-Var Hammercote Smooth is a premium quality durable coating for metal which provides a glossy smooth finish. As a rust resistant coating Hammercote provides a long lasting finish for metal, ironwork and many other suitably well prepared surfaces. This coating is fast drying and suitable for interior and exterior use. Hammercote is highly versatile being convenient and easy to use.

Suitable applications include:

Metal Railings, Gates, Radiators, Metal Fences, Bikes, Trailers, Boats and Engines.

Product Highlights

Can be used without a primer
For interior and exterior use
Hard Wearing
Rust Resistance
Fast Drying
Heat Resistant up to 150°C
Provides a hard durable film (Hardness increases over several days after application)
Suitable Surfaces: Metal
Finish: Smooth Gloss
Application: Brush or Spray
Drying time: Touch Dry 30min or 6 hours hard dry
Estimated Coverage: 10m² per litre

Select a Size

ColorBlue

* Please note that due to variations in monitor settings, the colours displayed here are for illustration purposes only.

For more accurate colour representation please request a colour card to be posted to you.

£22.52

Delivery calculated at checkout.

Select Quantity

How should I prepare metal before painting?

Any loose and flaking paint should be removed and all surfaces should be cleaned, and degreased with Coo-Var Universal Degreaser. Any rust should be removed, and surfaces should be abraded to make sure an adequate ‘key’ is produced. If the surface is galvanised, mordant solution should be used to etch the surface prior to painting.

Remove any existing rust using a mechanical sander or a wire brush.

Do I need to use a primer before painting with Hammercote?

A primer is not necessary with Coo-Var Hammercote products as it acts as a primer and a topcoat together. However if you want the added protection you can use Coo-Var All Metals Primer. All metal must be prepared correctly.

How many coats of paint are necessary?

Typically, two coats of paint are recommended for optimal coverage and durability.

How long does Hammercote Paint take to dry?

Touch dry 30 minutes, overcoat in under 20 minutes and hard dry 6 hours.

Can metal paint be used outdoors?

Yes, Hammercote is formulated for outdoor use and are designed to withstand weather conditions.

How do I prevent rust on painted metal surfaces?

Use special metal formulated paints such as Coo-Var Hammercote that have zinc properties in them to protect the metal.

Apply paint in multiple layers for better protection.

Regularly inspect and maintain the painted surface to address any chips or scratches that might expose the metal.

Can you paint rusty metal

Yes, you can paint rusty metal, but proper preparation is essential. We recommend removing any loose rust and sanding the surface. Then, use Coo-Var Universal Degreaser to degrease and clean the surface. Apply Rust Converter to stabilise any remaining rust. Follow this by painting with Coo-Var Hammercote.

Metal Preparation: Removal of loose/flaking rust, Oil Remover / Degreaser, Rust Converter

Metal Primer (Optional): Teamac Rapidry Zinc Phosphate Primer or Coo-Var All Metals Primer

Technical Data Sheet Hammercote Smooth

Safety Data Sheet Hammercote Smooth Gold

Safety Data Sheet Hammercote Smooth (Except Gold)

Premium Specialist Paints

High performance paints that you can trust

Fast, Reliable Delivery

Fast and reliable delivery all throughout the UK

Expert Support

Expert guidance from qualified paint inspectors

On site support

For specified projects and solutions for every need

Hammercote Metal Paint Finishes Explained

Not sure which finish is right for your project? Hammercote is available in Smooth, Hammered and Satin finishes, each designed to achieve a different appearance while providing long-lasting protection for metal surfaces.

Finish	Appearance	Best for
Smooth Finish	Clean, uniform finish with a professional look	Gates, railings, structural steel and industrial metalwork where a modern appearance is required
Hammered Finish	Decorative textured effect that creates visual depth	Older metal surfaces, wrought iron, gates and railings where minor imperfections need to be disguised
Satin Finish	Subtle low-sheen finish between matt and gloss	Decorative metalwork, architectural features and railings where a softer appearance is preferred

Smooth Finish

Hammercote Smooth Finish provides a clean, uniform coating that is ideal for metal gates, railings and structural steel. It is often chosen where a professional, modern appearance is required and is particularly popular for commercial and industrial projects.

Choose Smooth Finish if:

You want a modern appearance
The metal surface is in good condition
You are painting structural steel or industrial metalwork

Hammered Finish

Hammercote Hammered Finish creates a decorative textured effect that can help conceal surface imperfections. It is a popular choice for older gates, railings and wrought iron features where a smooth finish may highlight dents, repairs or weathering.

Choose Hammered Finish if:

The metal surface is older or imperfect
You want to disguise repairs or minor defects
You prefer a decorative textured effect

Satin Finish

Hammercote Satin Finish delivers a softer sheen than traditional gloss metal paints. It is well suited to decorative metalwork and architectural features where a more understated finish is preferred.

Choose Satin Finish if:

You want a lower-sheen finish
You are painting decorative metalwork
You prefer a more traditional appearance

Need help with your project?

Need help choosing the right coating system for your project? Our technical team offers expert advice, tailored specifications and on-site support to help you achieve the best results. Whether you’re dealing with concrete floors, metal surfaces, damp issues or specialist environments, we can recommend the right paints, primers and preparation methods for the job. Complete the contact form and our team will be in touch to discuss your project requirements.