Acid Etch for Concrete

Product Description

Coo-Var Acid Etch is a powerful water-based solution which chemically etches bare concrete and mortared floors and also removes salts and laitance from concrete and render.

This product can be used on bare concrete prior to painting to ensure good adhesion is given between substrate and paint system.

Product Highlights

Used to remove laitance and salts from bare concrete and render prior to painting
Use with all Coo-Var's Floor Paints and Swimming Pool Paint.
Essential for good adhesion on paint
Etches bare concrete floors
Prepares concrete quickly and effectively.
Suitable Surfaces: New concrete, Power floated concrete floors, Mortared floors
Application: Stiff Yard Brush
Estimated Coverage: 7m² per litre
Recommended Use: (click titles to go to product)
To prepare bare concrete prior to the application of Coo-Var Floor Paints, and Coo-Var Swimming Pool Paints.

* Please note that due to variations in monitor settings, the colours displayed here are for illustration purposes only.

For more accurate colour representation please request a colour card to be posted to you.

£34.03

Delivery calculated at checkout.

Select Quantity

What is Acid Etching?

Acid etching involves applying an acidic solution to a surface to eliminate dust and laitance but also creating a rough texture that enhances adhesion for coatings or paints, or sealants. It's used on concrete old or new.

How do I perform Acid Etching on concrete?

Preparation: Clean the surface thoroughly to remove dirt, grease, and loose debris.
Protection: Wear protective gear, including gloves, goggles, and a mask. Ensure the area is well-ventilated.
Mixing: Dilute the acid 3 parts water and 1 part acid etch.
Application: Apply the acid solution evenly using a brush or plastic watering can.
Rinsing: Rinse the surface thoroughly with water after chemical reaction has finished ( this will be when the solution has stopped fizzing)
Drying: Allow the surface to dry completely before applying any coatings.

How long should I leave the Acid on the surface?

The dwell time varies depending on the level. Typically, for concrete, it may be around 30 minutes. .

How do I neutralize the Acid after etching?

After the etching process as finished, the product is automatically neutralised, really to be rinsed off with clean water or mopped up.

Are there alternatives to Acid Etching?

Yes, alternatives include mechanical methods like sandblasting or grinding, which physically roughen the surface without the use of chemicals.

Can I paint directly after Acid Etching?

No, after acid etching, you need to thoroughly rinse and neutralize the surface, let it dry completely, and then ensure it is clean and free of any salts before applying paint or coatings.

How do I dispose of leftover Acid or rinse water?

Dispose of leftover acid etch that has been rinsed away or mopped down the drain once the chemical process has finished. This will be neutralised naturally and will not harm the environment.

Concrete Preparation: Clean and ensure the surface is dry