Concrete floors are durable, practical and widely used in garages, workshops, utility rooms, commercial premises and industrial buildings. Applying the right concrete floor paint can help protect the surface from wear, reduce dust, improve appearance and create an easier-to-clean finish.
Whether you're painting a domestic garage floor, workshop or commercial concrete floor, Coo-Var offers a range of floor paints designed to provide long-lasting protection and durability. If you're unsure which product is right for your project, our technical team can provide expert advice and recommendations.
Recommended Concrete Floor Paint Systems
The most suitable concrete floor paint will depend on how the area is used, the level of traffic expected and whether additional slip resistance is required. The table below provides guidance on some of the most common concrete floor applications and recommended products. If you are unsure which floor paint system you require for your project then you can get in touch with our technical team for a free specification.
| Project / use | Recommended product | Key benefits |
|---|---|---|
| Workshops & Sheds | General Purpose Floor Paints | Easy to apply, single pack paint designed for low traffic areas. |
| Car Stored Garage Floors | ProFloor / ProFloor Plus | Hard wearing two pack epoxy coatings that have strong resistance to medium traffic and car tyres. |
| Utility Rooms | General Purpose Floor Paints | Easy to apply, single pack paint designed for low traffic areas |
| Concrete Floors Requiring Slip Resistance | Anti Slip, SureGrip or Progrip | Anti slip paints for safety, exact product depends on level of slip resistance or strength required. |
| Light Traffic Commercial Concrete Floors | ProFloor or ProFloor Plus | Hard wearing two-pack epoxy coatings designed for medium traffic areas |
| High Traffic Commercial Concrete Floors | ProFloor Plus and PolyGaurd Polyurethane Topcoat (optional) | ProFloor Plus offers high traffic resistance with PolyGaurd as a top coat if UV or chemical resistance is required. |
| External Concrete Areas | All Coo-Var Floor Paints | All our floor paints can be applied to external concrete areas, get in touch with technical for support on which product would suit your area best. |
Concrete Floor Paint for Workshops, Sheds & Utility Rooms
Concrete floors are commonly found in workshops, sheds, utility rooms and small commercial units. These areas require a durable coating capable of withstanding foot traffic, equipment, tools and occasional spillages.
Applying a floor paint helps seal the concrete surface, reduce dust and create a cleaner working environment while improving the overall appearance of the space. For spaces where storage is required and normal foot traffic is present then we would recommend one of our general purpose floor paints. These are single pack easy to apply standard floor paints.
Concrete Floor Paint for Garages
Garage floors are exposed to daily vehicle traffic, tyre marks, oil contamination and general wear and tear. Applying a quality concrete floor paint helps protect the surface from damage while improving appearance and creating a cleaner, easier-to-maintain finish.
For garages used to store vehicles, we typically recommend a two-pack epoxy floor coating system such as our ProFloor system due to its durability and resistance to vehicle traffic. Where additional chemical resistance is required, such as protection against accidental fuel, oil or chemical spills, ProFloor Plus Two-Pack Epoxy provides a hard-wearing, high-performance finish suitable for demanding garage environments.
Learn more:
Concrete Floor Paint for Commercial Floors
Concrete floor paint is also widely used in retail units, storerooms, service areas and other commercial environments. The right coating system can help improve durability, simplify cleaning and provide long-lasting protection against everyday wear.
For areas exposed to higher traffic levels or more demanding conditions, our technical team can recommend alternative floor coating systems better suited to the application.
Preparing & Painting Concrete Floors
Proper surface preparation is essential for achieving a durable, long-lasting finish. Before applying any concrete floor paint, the surface should be clean, dry and free from dust, dirt, grease and other contaminants. Floors affected by oil or grease should be thoroughly cleaned using our Floor Paint Degreaser, while new or bare concrete may require treatment with our Acid Etch Solution to remove laitance and improve coating adhesion.
Once the floor has been properly prepared, the paint can be applied in accordance with the product instructions using a brush or roller. Most concrete floor paints require two coats to achieve optimum coverage, durability and appearance. Allow sufficient drying and curing time between coats and before exposing the surface to foot traffic, vehicles or equipment. Taking the time to prepare and apply the coating correctly will help maximise adhesion, durability and long-term performance.
Learn more: Preparing to paint a concrete floor
Need Help Choosing a Concrete Floor Paint?
Planning a Warehouse or Factory Floor Coating Project?
If you're unsure which floor paint is best for your project, our technical team is available to provide expert advice and product recommendations.
Whether you're coating a garage floor, workshop, utility room or commercial premises, we can help identify the most suitable solution for your requirements.
We manufacture floor paints for a variety of projects
Frequently asked questions
What is the best paint for a concrete floor?
The best concrete floor paint depends on the environment, traffic levels and performance requirements. Acrylic floor paints are often suitable for garages, workshops and utility rooms, while heavier-duty systems may be required for commercial applications or where car traffic is present.
Can you paint bare concrete floors?
Yes. Bare concrete floors can be painted once they have been properly prepared. New concrete may require acid etching before painting to ensure good adhesion.
Do I need to etch concrete before painting?
Many bare concrete floors benefit from acid etching to remove laitance and create a suitable surface for coating adhesion.
Can concrete floor paint be used in garages?
Yes. Concrete floor paint is commonly used in garages to provide a durable, easy-to-clean finish that can withstand vehicle traffic and everyday use.
How long does concrete floor paint last?
The lifespan of a floor coating depends on preparation, traffic levels and the product selected. Proper preparation and application will help maximise durability.
Can floor paint be applied over existing paint?
In many cases, yes, provided the existing coating is sound, well adhered and properly prepared before painting.
Is concrete floor paint suitable outdoors?
Some concrete floor coatings are suitable for external use. Always check the product specification before application.
What preparation is required before painting concrete?
Concrete should be clean, dry and free from contaminants. Depending on the condition of the floor, preparation may include degreasing, acid etching and repair work before painting.
