Guard-Coat Antibacterial Two-Pack Epoxy

Product Description

Coo-Var Guard-Coat is a two pack water-based paint for floors and walls, containing antibacterial properties through Silver ion technology to protect against MRSA and E.Coli.

Ideal for use in hospitals, clinics, schools & commercial kitchens it also reduces scuffs on walls from chairs and beds.

RAL, BS4800, BS381C & NCS Colours to Order (Minimum of 5L Required).

As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053 or email info@coo-var.co.uk.

*This is a professional use only product

Product Highlights

Anti-baterial properties

Very hard wearing

For floors and walls

Water based

Special Colours available

Suitable Surfaces: Wood, Concrete, Masonry, Asphalt

Finish: Off Gloss - Anti- Slip is aggregated

Application: Shortpile Roller or brush

Drying time: Touch Dry 4 hours or 8-12 hours hard dry. Full Cure: 5-7 days

Overcoat time: 16 hours min or 7 days max

Estimated Coverage: 6-10m² per kg

Select a Size

ColorClear

* Please note that due to variations in monitor settings, the colours displayed here are for illustration purposes only.

For more accurate colour representation please request a colour card to be posted to you.

£235.46

Delivery calculated at checkout.

Select Quantity

Can Guard Coat two-pack epoxy floor and wall paint be applied to any surface?

Guard Coat can be applied to walls, ceilings and floors, concert, plaster, and over previous emulsion paints.

Can I apply Guard Coat two-pack epoxy floor and wall paint over a previous floor paint?

On walls this product can be applied over a previous paint coating however on floors we only recommend applying Guard Coat over a previous two-pack epoxy floor paint or primer.

Do I need a primer when using Guard Coat two-pack epoxy floor and wall paint?

We recommend priming bare concrete with ProSeal High Performance Primer

How should I prepare the surface before applying Guard Coat two-pack epoxy floor and wall paint?

For concrete floors acid etching may be necessary to remove dust and laitance.

Ensure the surface is completely clean and dry before application, coo-var degreaser or oil remover can be used to clean the floor.

Moisture content of the surface should be less than 14% prior to painting.

For other surfaces, appropriate cleaning and sanding may be required to create a suitable profile for the paint to adhere to.

For previously painted surfaces, make sure to clean, abrade and remove all loose and flaking material.

How long does Guard Coat two-pack epoxy floor and wall paint take to dry?
Over coat time is 16 hours, you can walk over the surface after 24 but we recommend leaving the floor 5 - 7 days before exposing it to heavy traffic.

How many coats of Guard Coat two-pack epoxy floor and wall paint should I apply?
For the best durability and finish, it’s recommended to apply two coats.

What maintenance is required for Guard Coat two-pack epoxy floor and wall paint?
Regular sweeping and mopping with a non-abrasive cleaner will keep the floor looking good and anti-bacterial technology in effect. Avoid using harsh chemicals or abrasive cleaning tools, as these can damage the epoxy coating. Additionally, promptly clean up any spills to prevent staining.