Profloor Two-Pack Epoxy Floor and wall Paint

Product Description

Coo-Var Profloor is a hard wearing water based, solvent free two pack floor coating. Suitable for use in heavy traffic areas such as foot, forklift and vans. Can be used in for both interior and exterior and it can also be used on existing stable paints.

As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053 or email info@coo-var.co.uk.

RAL, BS4800, BS381C & NCS Colours to Order (Minimum of 5L Required).

Please note: This product is sold as a 5KG mixed unit and is dispatched in 2 separate cans a 2.5L & 5L

*This is a professional use only product

Product Highlights

Low Odour
Fast Drying
Water-Based
Exceptional Coverage
Highly hardwearing
Special colours to order
Suitable Surfaces: Wood, Concrete, Masonary, Asphalt and Suitably Prepared Metal.
Finish: Off Gloss
Application: Shortpile Roller or brush
Drying time: Touch Dry 4 hours or 8-12 hours hard dry. Full Cure 5-7 days
Overcoat time: 16 hours min or 72 hours max
Estimated Coverage: 6-10m² per kg

Select a Size

ColorClear

* Please note that due to variations in monitor settings, the colours displayed here are for illustration purposes only.

For more accurate colour representation please request a colour card to be posted to you.

£213.26

Delivery calculated at checkout.

Select Quantity

Can Profloor two-pack epoxy floor paint be applied to any surface?

Profloor can be applied to concrete, tarmac, wood, and metal.

Can I apply Profloor two-pack epoxy floor paint over a previous floor paint?

We recommend applying this floor paint over previous two-pack epoxy floor paints only, applying over a single pack floor paint is not recommended.

Do I need a primer when applying a two-pack epoxy floor paint?

We recommend priming bare concrete with ProSeal High Performance Primer

For Metal use 2 Pack Zinc Phosphate Primer

How should I prepare the surface before applying the paint?

For concrete floors, acid etching may be necessary to remove dust and laitance.

Ensure the surface is completely clean and dry before application, coo-var degreaser or oil remover can be used to clean the floor.

Moisture content of the surface should be less than 14% prior to painting.

For other surfaces, appropriate cleaning and sanding may be required to create a suitable profile for the paint to adhere to.

For previously painted surfaces, make sure to clean, abrade and remove all loose and flaking material.

How long does Profloor two-pack epoxy floor paint take to dry?
Ovecoat time is 16 hours, you can walk over the surface after 24 but we recommend leaving the floor 5 - 7 days before heavy traffic.

How many coats of Profloor two-pack epoxy floor paint should I apply?
Two coats.

What maintenance is required for Profloor two-pack epoxy floor paint?
Regular sweeping and mopping with a non-abrasive cleaner will keep the floor looking good. Avoid using harsh chemicals or abrasive cleaning tools, as these can damage the epoxy coating. Additionally, promptly clean up any spills to prevent staining.