Dampshield Primer Two-Pack Resin Based Epoxy Primer

Product Description

Coo-Var Dampshield creates a damp-proof membrane and can be used on new concrete before it has fully cured. It adheres to damp and/or floors with residual oil contamination. Ideal for cellars, basements, garages, factories and warehouses.

Works particularly well as a system underneath Coo-Var Profloor Plus or Coo-Var Polyguard.

As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053or email info@coo-var.co.uk.

*This is a professional use only product

Product Highlights

Ideal for: New concrete floors, damp floors, oily floors, garages, workshops, basements, factories and warehouses

Interior or exterior use

Allows the commencement of painting earlier than otherwise would be available

Creates a Breathable Damp Proof Course

Suitable Surfaces: Concrete Floors, Screeds, Vinyl tiles and other difficult surfaces

Overcoat with ProFloor Plus or PolyGuard PU Floor Paint

Finish: Gloss

Application: Roller

Drying time: 2 hours

Overcoat time: 12 hours min / 48 hours max

Estimated Coverage: 20m²

* Please note that due to variations in monitor settings, the colours displayed here are for illustration purposes only.

For more accurate colour representation please request a colour card to be posted to you.

£216.44

Delivery calculated at checkout.

Select Quantity

What is Dampshield two-pack epoxy primer used for?

This two-pack epoxy primer forms a damp-proof membrane (DPM) on floors that lack one. Additionally, it can be applied to new concrete screeds without needing to wait for them to dry before painting.

Can Dampshield two-pack epoxy primer be applied to any surface?

Dampshield can be applied to concrete and screeds.

Can I apply Dampshield two-pack epoxy primer over a previous floor paint?

This product is designed to be applies to a bare substate that still contains a lot of moisture.

How should I prepare the surface before applying Dampshield two-pack epoxy primer?

We recommend acid etching any bare concrete to remove dust and laitance.

Coo-Var degreaser or oil remover can be used to clean the floor.

How long does Dampshield two-pack epoxy prime rtake to dry?
Minimum overcoat time is 12 hours and maximum overcoat time is 48 hours. This must be over coated with Profloor Plus

How many coats of Dampshield two-pack epoxy primer should I apply?
See technical data sheet for product to asses how many coats are required for your application, this is normally one coat.